Light-tight Cuvette and 15mm-Vial Housing with Two SMA 905 Fiber Adaptors

Description

Brand-new Light-Tight Cuvette and 15mm-Vial Housing with SMA 905 Fiber Connectors
What are included in this list:
(1) SMA 905 adaptors  (no focusing/collimating)                                                      [Quantity=2]
* change SMA to FC/PC adaptor, or any SMA & FC mixed combination is possible upon email request.
(2) Light-tight cuvette housing (12.5x12.5x52 mm cuvette and OD 15 mm vials)    [Quantity=1]
(3) A wrench for the 4-40 screw adjustment of adaptor or collimator                        [Quantity=1]
(4)
Optional
: 1 retainer for secure filters (<=dia. 5 x 6 mm)
[Quantity=1]
(5)
Options to use
sealing gasket (up to 150 deg. C)  [not provided]
Versatile f
eatures include
(1) Bottom: Diameter 1.5"x1/4" Plate with two 4-40 threaded mounting holes, two slots for 4-40 screws, one 8-32 threaded hole (with set screw installed as default).
(2) Side: Two 4-40 threaded holes (with set screws installed as default configuration).
(3) Side: Allow up to four SMA 905 adaptors, collimators, or focusing lens in 3/8"-24 threaded mounts.
(4) Top:
One 4-40x1/2 (or your choice of other lengths) to push on the lid of cuvette inside the housing.
Rev. 0: Two 4-40x1-1/4 screws to lock the lid to create a light-tight sealed housing.
Rev. 1: One 4-40x1-1/4 screw and one 4-40 cone-tipped pin for faster operation.
This is the default unless you request to use the older Rev.0.
(5) Dimensions: Dia. 1.5"x 1.5" for the bottom cuvette housing, 1.00"x1.00"x1.125" for the top cover.
It can be used with most of compact fiber optic spectrometer application for transmisson,reflection, fluorescence, Raman signal collection.
Educational discount
- please use your school/academic email address to request.
Other shipping options may be
available upon request.
The SMA 905 connectors are fully compatible and interchangeable with our UV-NIR adjustable fiber collimator!
The collimators are adjusted for best collimating effect at 200-2200 nm. Aligned with Xenon lamp and UV fused silica fiber cable. They are
not
included in this package.
You may choose up to four collimators/focusing lens to use with this cuvette/sample housing by contacting us.
As an example, two collimators are shown mounted to the OceanOptics's filter bench.
Technical data for the collimator:
Model: P3S-SMA905-Col050PX
Batch:  PQA017-0708-01PX
Lens Diameter (mm):  5.0
Clear Aperture (mm) : 3.8
Focal Length (mm):     8.3
Numerical Aperture:   0.23
Lens Material:           Fused Silica
Wavelength range:    200-2000nm (best alignment range)
Fiber connection:      SMA 905 (UNS 1/4”-36), Stainless Steel connector
Housing Material:        Aluminum(anodize) and Stainless Steel
Thread and interface:  Dual interfaces (UNF 3/8"-24, and Smooth Dia. 1/2")
Temperature (°C):       -30 to 150 °C
(contact us for wider temperature ranges)